{"title": "This Week at Dobson: February 14","images":[{"caption":"Pat continues to make windlines using new method he has developed with our CNC router. The piece is layed out so that the CNC cuts the patern for a section of windline but does not cut entirely through the wood. ","src":"http://www.saintthomaschurch.org/uploads/photos/10468056_493603677501177_8753081956250110481_n.jpg"},{"caption":"Then he can put glue into the cuts and literally fold the piece up. ","src":"http://www.saintthomaschurch.org/uploads/photos/12646940_493603430834535_3310580250973118686_n.jpg"},{"caption":"He can then put masking tape on the open joint to hold it until the glue dries. ","src":"http://www.saintthomaschurch.org/uploads/photos/12742040_493603874167824_7137249985477287602_n.jpg"},{"caption":"This process is much more fast than the old method of making many pieces and having to glue them together and clamp them up with bar clamps. ","src":"http://www.saintthomaschurch.org/uploads/photos/12743947_493604210834457_1417057090968161572_n.jpg"},{"caption":"Here Pat has a straight section of windline read to glue up. ","src":"http://www.saintthomaschurch.org/uploads/photos/12743582_493604237501121_5910066658338119217_n.jpg"},{"caption":"Kent isstill working on the very elaborate Positiv case. ","src":"http://www.saintthomaschurch.org/uploads/photos/12742683_493604557501089_3064059310085203058_n.jpg"},{"caption":"This close up view shows some of the veryinvolved and difficult mitering necessary to make all the moldings flow around the various columns in the facade. ","src":"http://www.saintthomaschurch.org/uploads/photos/12744470_493604754167736_1319330106423561014_n.jpg"},{"caption":"This week Randy has been applying carvings to the impost. ","src":"http://www.saintthomaschurch.org/uploads/photos/12745848_493604377501107_7795288999799043402_n.jpg"},{"caption":"These carvings contains John Scott's favorite verses which he requested to be on the impost. ","src":"http://www.saintthomaschurch.org/uploads/photos/12742700_493604444167767_80876888998527867_n.jpg"},{"caption":"Here Randy is fitting the ribs for the vaulting under the impost and above the Positiv case. ","src":"http://www.saintthomaschurch.org/uploads/photos/12733396_493604637501081_8733826397771106546_n.jpg"},{"caption":"It's taking lots of time to get all the pices to come together perfectly. ","src":"http://www.saintthomaschurch.org/uploads/photos/12742608_493610687500476_6450123612101874_n.jpg"},{"caption":"This is an over all view of this heroic piece of woodworking. ","src":"http://www.saintthomaschurch.org/uploads/photos/12728982_493610440833834_8998369257945809627_n.jpg"}]}